Export Report

Steps

1. Click the Export Report button and select the target road line.

2. Set the export path and click OK to export the report.

Report Content

1. Summary: One road line is considered as one section. It summarizes the information for the selected section.

   • Section List: Statistical information for all selected sections. The specific fields are as follows:

     Field	Description
     Section	Section number, unique within the selected road line set and this report.
     Number of Sample Units	The total number of sample units in the current section.
     Section PCI	The area-weighted average of the PCI of all sample units in the current section.
     Total Fill Volume	The sum of fill volumes for all distresses within the current section.
     Total Cut Volume	The sum of cut volumes for all distresses within the current section.

Note: Only distresses detected by Point Cloud-based Distress Detection will automatically calculate fill and cut volumes. For distresses obtained through Image-based Distress Detection and Distress Editor, the fill and cut volumes are 0.

1. Section: Provides detailed information on distress distribution within the section, organized by section order.

   • Sample Unit List: Lists sample unit information within the current section on a per-sample-unit basis. The specific fields are as follows:

     Field	Description
     ID	Automatically numbered in PCI, starting from one end of the section with an initial number of 1. Unique within the current section.
     CDV (Corrected Deduct Value)	The Corrected Deduct Value (CDV) of the current sample unit.
     PCI	The PCI of the current sample unit (PCI = 100 - CDV).
     Fill Volume	The sum of fill volumes for all distresses in the current sample unit.
     Cut Volume	The sum of cut volumes for distresses in the current sample unit.
     Area	The area of the current sample unit.

   • Distress Severity Summary Table: Summarizes relevant information by distress type and severity level. This is a crucial step in the PCI calculation process. The specific fields are as follows:

     Field	Description
     Sample Unit	The ID of the sample unit where the distress is located.
     Type (Severity)	Uses "Distress Type + Severity" as the key.
     Quantity	The total quantity of the current distress type and severity level. For specific calculation methods, see PCI.
     Density	The density of the current distress type and severity, equal to the quantity divided by the current sample unit area.
     DV (Deduct Value)	The deduct value for the current distress type and severity level. For specific calculation methods, see PCI.

   • Distress List: Lists information for all individual distresses within the section. The specific fields are as follows:

     Field	Description
     Sample Unit	The ID of the sample unit where the distress is located.
     Distress Type	The type of the distress.
     Severity	The severity level. For specific methods of obtaining this, see PCI.
     Position	The XYZ coordinates within the distress.
     Area Impacted	The area of the distress vector polygon.
     Fill Volume	The fill volume of the distress.
     Cut Volume	The cut volume of the distress.